User Manual

Chapter 3 Initial IP Address Configuration
When setting up your NPort W2250/2150 for the first time, the first thing you should do is configure the IP
address. This chapter introduces the method to configure the device server’s IP address. Select one of the
initial IP Address configuration methods to configure NPort W2250/2150’s IP Address. For more details
about network settings, see the Network Settings section from Chapter 5, Web Console Configuration.
This chapter includes the following sections:
 Installation Procedure for First Time User
 Factory Default IP Address
 ARP

Telnet Console
 Serial Console (19200, n, 8, 1)
Installation Procedure for First Time User
STEP 1: After removing NPort W2250 from the box, the first thing using a cross-over Ethernet
cable connect directly to your computer’s Ethernet port.
STEP 2: Attaching the power adaptor
STEP 3: Connect NPort W2250’s serial port to a serial device.
STEP 4
: Use Web console to configure the NPort W2250 via Ethernet port.
Note: Recommend to use web console for configuration. About how to use web console ,please