User Manual

Time server
Setting Factory Default Necessity
IP Address or Domain Name
(E.g., 192.168.1.1,
time.stdtime.gov.tw, or
time.nist.gov)
None Optional
NPort 5200 uses SNTP (RFC-1769) for auto time calibration.
Input the correct “Time server” IP address or domain name. Once NPort 5200 is configured
with the correct Time server address, NPort 5200 will request time information from the
“Time server” every 10 minutes.
Web/Telnet Console
The “Disable” option for “Web Console” and “Telnet Console” is included for security reasons. In
some cases, you may want to Disable one or both of these console utilities as an extra precaution
to prevent unauthorized users from accessing your NPort 5200. The factory default for both Web
console and Telnet console is Enable.
Setting Factory Default Necessity
Enable or Disable Enable Required
Network Settings
General Setting