User Manual

You must assign a valid IP address to NPort 5200 before it will work in your network environment.
Your network system administrator should provide you with an IP address and related settings for
your network. The IP address must be unique within the network (otherwise, NPort 5200 will not
have a valid connection to the network). First time users can refer to Chapter 3, “Initial IP Address
Configuration,” for more information.
You can choose from four possible “IP configuration” modes—Static, DHCP, DHCP/BOOTP, and
BOOTP
—located under the web console screen’s IP configuration drop-down box.
Method Function Definition
Static User defined IP address, Netmask, Gateway.
DHCP
DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time
Server
DHCP/BOOTP
DHCP Server assigned IP address, Netmask, Gateway, DNS, and Time
Server, or BOOTP Server assigned IP address (if the DHCP Server does not
respond)
BOOTP BOOTP Server assigns IP address
IP Address
Setting Factory Default Necessity
E.g., 192.168.1.1
(IP addresses of the form x.x.x.0
and x.x.x.255 are invalid.)
192.168.126.254 Required
An IP address is a number assigned to a network device (such as a computer) as a permanent