User Manual

In the above example, two NPort device have established an Ad-Hoc peer-to-peer

relationship. They communicate directly to each other’s serial devices without AP.

In the above example, the NPort device communicates with host computer via the

AP. The host computer is connected via an Ethernet connection to the AP. As such, the NPort

device and the host computer communicate directly and can transfer information to serial devices.

SSID:

Enter the name of the wireless network (SSID). The W2250/2150 connects to this wireless

network.

Channel:

Select from the pull down menu the radio channel for wireless network. In infrastructure mode, AP

will specify channel automatically. In Ad-hoc mode, user can specify channel by self.

If you want to change the WLAN IP address quickly, you can click the Wizard to configure.

WLAN Configuration -> Security