User Manual

The wireless network interface supports data encryption (WEP, 64 or 128 bits) and authentication
(Open or Shared authentication).
Autherntication:
Select an authentication scheme from the pull down menu: Open or Shared. Selecting
Shared requires manually entering the authentication key.
WEP Mode: enable WEP ,data packet will be encrypted before send .you can select 64 bit or 128
bit .By default, WEP Mode is disabled.
WEP Key format: There are two formats for selection, ASCII or HEX。
WEP Key1~ WEP Key4：There are four WEP Key to prevent data from steal.The setting of WEP
Key must be the same as AP.