User Manual

KB per port.
Destination IP address 1
Setting Factory Default Necessity
IP address or Domain Name
(E.g., 192.168.1.1)
None Required
Allows NPort 5200 to connect actively to the remote host whose IP address is set by this
parameter.
UDP Mode
Delimiter 1
Setting Factory Default Necessity
00 to FF None Optional
Delimiter 2
Setting Factory Default Necessity
00 to FF None Optional
Once the NPort 5200 receives both delimiters through its serial port, it immediately packs all
data currently in its buffer and sends it out the NPort 5200’s Ethernet port.