User Manual

Cold start
This refers to starting the system from power off (contrast this with warm start). When
performing a cold start, NPort W2250/W2150 will automatically issue an Auto
warning message by e-mail, or send an SNMP trap after booting up.
Warm start
This refers to restarting the computer without turning the power off. When performing
a warm start, NPort W2250/W2150 will automatically send an e-mail, or send an
SNMP trap after rebooting.
Authentication failure
The user inputs a wrong password from the Console or Administrator. When
authentication failure occurs, NPort W2250/W2150 will immediately send an e-mail
or send an SNMP trap.
IP address changed
The user has changed NPort W2250/W2150’s IP address. When the IP address
changes, NPort W2250/W2150 will send an e-mail with the new IP address before
NPort W2250/W2150 reboots. If the NPort W2250/W2150 is unable to send an e-mail
message to the mail server within 15 seconds, NPort W2250/W2150 will reboot
anyway, and abort the e-mail auto warning.
Password changed
The user has changed NPort W2250/W2150’s password. When the password changes,