User Manual

Installation for Real TTY and Fixed TTY
<Install real TTY driver >
1. Procedure
To map NPort serial port to host tty port, you need to:
(1). Setup NPort.
Make sure the IP configuration is ok and you can access
the NPort (ping, telnet...) seccussfully. Then you MUST
configure the NPort serial port to "Real COM Mode".
(2). Install driver files into the host.
Refer to "3.Driver Files Installation"
(3). Map NPort serial to host tty port.
Refer to "4.Mapping TTY Ports"
2. Hardware Installation
Prior to proceed to software installation, please make sure the
hardware installation is completed as user's manual illustrated.
The default IP address for NPort Server is 192.168.127.254.
!!!!!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!
After hardware installation, you MUST configure the NPort
operating mode to "Real COM Mode".
!!!!!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!
3. Driver Files Installation
a. Get the driver file from product CD-ROM or web site.
b. Login into the console as a super user (root).
c. Execute 'cd /' to go to root directory.
d. Copy the driver file npreal2xx.tgz into '/' directory.
e. Execute 'tar xvfz npreal2xx.tgz' to copy all files into the system.
f. Execute '/tmp/moxa/mxinst'.