User Manual

NPort W2250/2150 Plus User’s Manual Web Console Configuration
5-9
Infrastructure Mode
In the following example, the NPort W2250/2150 communicates with the host computer via the
AP. The host computer connects to the AP via an Ethernet connection, allowing serial data to be
transmitted back and forth between the serial devices and host computer.
WLAN
RS-485
Flow meters
Antenna
Port 1
RS-232/422/485
Port 2
RS-232/422-485
Wireless Serial Device Server
W2250
Reset
Ethernet
12-48 VDC
Ready
WLAN
Serial 1
Serial 2
RS-232
Electronic scales
Antenna
Port 1
RS-232/422/485
Port 2
RS-232/422-485
Wireless Serial Device Server
W2250
Reset
Ethernet
12-48 VDC
Ready
WLAN
Serial 1
Serial 2
Host
computer
Wireless
Access Point
Router
Ethernet
Internet
SSID
Enter the name of the wireless network (SSID) that the W2250/2150 is connected to.
Channel
Select a radio channel for the wireless network from the pull-down menu. In infrastructure mode,
the AP will specify the channel automatically. In Ad-hoc mode, the user must use the pull-down
menu to specify the channel.
ATTENTION
Click on the Wizard to configure the WLAN IP address quickly.