User's Manual
Table Of Contents
- 10. Web Console: Restart
- 11. Installing and Configuring the Software
- A. SNMP Agents with MIB II & RS-232-Like Groups
- B. Well Known Port Numbers
- C. Ethernet Modem Commands
- D. Federal Communication Commission Interference Statement
- E. FCC Warning Statement
NPort W2150A/W2250A Series Installing and Configuring the Software
11-11
4. On the Serial Parameters tab, specify the communication settings that the host will use when opening the
COM port.
5. On the Security tab, select the Enable Data Encryption option to enable data to be encrypted when
transmitted over the COM ports. After selecting the encryption option, select the Keep connection option
to start encrypting COM port communications immediately without restarting the COM ports. This may
speed up opening and closing of the COM port for your host, but it also causes your host to tie up the NPort
serial port so other hosts cannot use it.