User's Manual

NPort W2150A/W2250A Series Installing and Configuring the Software
11-20
1. Modify npreal2d.cf.
2. Remove the relevant TTY ports in directory /dev.
3. Restart the driver.
If the IP address is not provided in the command line, the program will list the installed servers and total ports
on the screen. You will need to choose a server from the list for deletion.
Removing Linux Driver Files
A utility is included that will remove all driver files, mapped TTY ports, and unload the driver. Enter the directory
/usr/lib/npreal2/driver and execute mxuninst to uninstall the driver. This program will perform the
following actions:
1. Unload the driver.
2. Delete all files and directories in /usr/lib/npreal2.
3. Delete directory /usr/lib/npreal2.
4. Modify the system initializing script file.
UNIX Fixed TTY Drivers
A fixed TTY driver is provided that will map UNIX host TTY ports to NPort serial ports. Once the mapping has
been set up, UNIX users and applications can connect to an NPort serial port as if it were a local TTY port. This
driver has been designed and tested for the majority of UNIX systems. Please check http://www.moxa.com
for
the latest UNIX systems support.