User's Manual
NPort W2150A/W2250A Series Installing and Configuring the Software
5-5
2. The utility will being searching for NPort device servers.
3. When the search is complete, the NPort units that were found will be listed in the main window.
Modifying NPort IP Addresses
1. Once the Device Search Utility (DSU) has found NPort device servers on the LAN, you can modify any
unit’s IP address. Select the desired NPort in the main window and click Assign IP on the main toolbar.
This will modify the IP address for the active network connection (LAN or WLAN).
2. Enter the new IP address and netmask. If multiple units were selected, you may assign addresses
sequentially by clicking Assign IP Sequentially. Click OK to proceed.