User's Manual

NPort W2150A/W2250A Series Installing and Configuring the Software
5-16
5. On the Security tab, select the Enable Data Encryption option to enable data to be encrypted when
transmitted over the COM ports. After selecting the encryption option, select the Keep connection
option to start encrypting COM port communications immediately without restarting the COM ports. This
may speed up opening and closing of the COM port for your host, but it also causes your host to tie up
the NPort serial port so other hosts cannot use it.
6. On the IPv6 Setting tab, interface 1 and 2 are able to change.
7. Click OK when you have finished configuring the COM port