User's Manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Initial IP Configuration
- 4. Introduction to Operation Modes
- 5. Web Console: Basic Settings
- 6. Web Console: Network Settings
- 7. Web Console: Serial Port Settings
- 8. Web Console: System Management
- 9. Web Console: System Monitoring
NPort W2150A/W2250A Series Web Console: Serial Port Settings
7-3
Operation Mode
Default RealCOM
Options RealCOM, RFC2217, TCP Server, TCP Client, UDP, Pair_Master, Pair_Slave, EModem
Description Along with Application, this field specifies the serial port’s operation mode, or how it will
interact with network devices. Depending on how Application is configured, different options
are available for Mode. Depending on how Mode is configured, additional settings will be
available for configuration. For an introduction to the different operation modes, please refer
to Chapter 4. RealCOM: This serial port will operate in RealCOM mode.
RFC2217: This serial port will operate in RFC2217 mode.
TCP Server: This serial port will operate in TCP Server mode.
TCP Client: This serial port will operate in TCP Client mode.
UDP: This serial port will operate in UDP mode.
Pair_Master: This serial port will operate in Pair Connection Master mode.
Pair_Slave: This serial port will operate in Pair Connection Slave mode.
EModem: This serial port will operate in Ethernet Modem mode.