User's Manual

NPort W2150A/W2250A Series Introduction
1-3
Product Specifications
Ethernet Interface
Number of Ports:
1
Speed:
10/100 Mbps, auto MDI/MDIX
Connector:
RJ45
Magnetic Isolation Protection:
1.5 KV built-in
WLAN Interface
Standard Compliance:
802.11a/b/g
Network Modes:
Infrastructure, Ad-Hoc
Transmit Power:
802.11a: 14 dBm (typical)
802.11b: 17 dBm (typical)
802.11g: 15 dBm (typical)
Receive Sensitivity:
-80 dBm
Radio Frequency Type:
DSSS/OFDM
Transmission Rate:
802.11a: 54 Mbps
802.11b: 11 Mbps
802.11g: 54 Mbps (max.) with auto fallback (54, 48, 36, 24,
18, 12, 11, 9, 6, 5.5, 2, 1 Mbps)
Transmission Distance:
Up to 100 meters (in open areas)
Wireless Security:
• WEP: 64
-bit/128-bit data encryption
• WPA, WPA2, 802.11i: Enterprise mode and
Pre-Share Key (PSK) mode
• Encryption: 128
-bit TKIP/AES-CCMP EAP-TLS, PEAP/GTC, PEAP/MD5, PEAP/MSCHAPV2, EAP-TTLS/PAP,
EAP
-TTLS/CHAP, EAP-TTLS/MSCHAP, EAP-TTLS/MSCHAPV2, EAP-TTLS/EAP-MSCHAPV2, EAP-TTLS/EAP-
GTC,
EAP-TTLS/EAP-MD5, LEAP
Antenna Connector:
Reverse SMA
Serial Interface
Number of Ports:
NPort W2150A: 1
NPort W2250A: 2
Serial Standards:
RS-232/422/485 (DB9 male connector)
Off
-line Port Buffering:
NP
ort W2150A: 20 MB
N
Port W2250A: 10 MB
Serial Line Surge Protection:
1KV (level 2)
Serial Communication Parameters
Data Bits:
5, 6, 7, 8
Stop Bits:
1, 1.5, 2
Parity:
None, Even, Odd, Space, Mark
Flow Control:
RTS/CTS, XON/XOFF
Baudrate: 50 bps to 921.6 Kbps
Serial Data Log:
64 KB
Serial Signals
RS
-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS
-422: TxD+, TxD-, RxD+, RxD-, GND
RS
-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS
-485-2w: Data+, Data-, GND
Software
Network Protocols:
ICMP, IP, TCP, UDP, DHCP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, SNTP, SSH,
HTTPS
Configuration Options:
Web Console, Serial Console, Telnet Console