User's Manual

---------------------------------------------------------------------------------------------------------------------------------  www.moxa.com  [e-mail]
LED Indicator
Type Color Meaning
PWR1/PWR2
Green Power is being supplied to power input PWR1,
PWR2.
Off Power is off, or power error condition exists.
Ready
Green Steady On: Power is on and the gateway is
functioning normally.
Blinking: The gateway has been located by MGate
Manager’s Location function.
Red Steady On: Power is on and gateway is booting up.
Blinking: Indicates an LAN IP conflict, or DHCP or
BOOTP server did not respond properly.
Off System power is off
Ethernet Link Green 100Mbps Ethernet connection
Amber 10Mbps Ethernet connection
Off Ethernet cable is disconnected or has a short
WLAN Green Steady on: Wireless enabled
Blinking: Indicates a WLAN IP conflict, or that the
DHCP or BOOTP server did not respond properly
RF
(signal strength)
Green 3 LED = signal strength reach between 66%~100%
2 LED = signal strength reach between 33%~66%
1 LED = signal strength reach between 0%~33%
P1/P2
(Serial signal)
Green Serial port is transmitting data
Amber Serial port is receiving data
Off No data is communicating