Quick Installation Guide

- 21 -
On the second SSID Settings screen, configure the SSID
Broadcast Status and Security type. From here, you can also
copy the configuration over to the second SSID. When finished,
click CONFIRM.
.
Configuring the AWK as a Slave
• Step 1: Set the operation mode of the AWK to Slave mode.
Go to Wi-Fi  Wireless Settings and select Slave from the
Operation Mode drop-down list, set the SSID, and click Apply. For
more detailed configurations, refer to the AWK-3251A-M12-RCC
User Manual.