User Manual

AirWorks AWK-3131A Web Console Configuration
Time server 1/2
Setting Description Factory Default
IP/Name of Time IP or Domain name of the NTP time server. The 2nd NTP server time.nist.gov
Server 1/2 will be used if the 1st NTP server fails to connect.
Query period
Setting Description Factory Default
Query period time This parameter determines how often the time is updated from 600 (seconds)
(1 to 9999 seconds) the NTP server.
Wireless Settings
The essential settings for wireless networks are presented in this function group. Settings must be properly
set before establishing your wireless network. Familiarize yourself with the following terms before starting
the configuration process:
AP: In a wireless local area network (WLAN), an access point is a station that transmits and receives data.
Client: When the AWK-3131A is configured for Client mode, it can be used as an Ethernet-to-wireless (or
LAN-to-WLAN) network adaptor. For example, a notebook computer equipped with an Ethernet adaptor but
no wireless card can be connected to this device with an Ethernet cable to provide wireless connectivity to
another AP.
Operation Mode
The AWK-3131A supports four main operation modes—AP, Client, Master, and Slave—each of which plays a
distinct role on the wireless network.
Wireless Enable
Setting Description Factory Default
Enable/Disable The RF (Radio Frequency) module can be manually turned on or Enable
off. This function is available in AP operation mode only.
Operation Mode
Setting Description Factory Default
AP The AWK-3131A plays the role of wireless Access Point AP
Client The AWK-3131A plays the role of wireless Client
Master This mode collocates with AWK-5232/6232’s Wireless bridge
mode. The AWK-3131A plays the role of wireless Master.
Slave This mode collocates with AWK-5232/6232’s Wireless bridge
mode. The AWK-3131A plays the role of wireless Slave.
3-7