User Manual

AirWorks AWK-3131A Web Console Configuration
Subnet mask
Setting Description Factory Default
subnet mask Identifies the type of sub-network (e.g., 255.255.0.0 for a None
Class B network, or 255.255.255.0 for a Class C network)
Primary/ Secondary DNS server
Setting Description Factory Default
IP address of Primary/ The IP address of the DNS Server used by your network. After None
Secondary DNS server entering the DNS Server’s IP address, you can use URL as well.
The Secondary DNS server will be used if the Primary DNS
server fails to connect.
Start IP address
Setting Description Factory Default
IP address Indicates the IP address which AWK-3131A can start assigning None
Maximum number of users
Setting Description Factory Default
1 – 999 Specifies how many IP address can be assigned continuously None
Client lease time
Setting Description Factory Default
1 – 10 days The lease time for which an IP address is assigned. The IP 10 (days)
address may go expired after the lease time is reached.
Packet Filters
The AWK-3131A includes various filters for IP-based packets going through LAN and WLAN interfaces. You
can set these filters as a firewall to help enhance network security.
MAC Filter
The AWK-3131A’s MAC filter is a policy-based filter that can allow or filter out IP-based packets with
specified MAC addresses. The AWK-3131A provides 8 entities for setting MAC addresses in your filtering
policy. Remember to check the Active check box for each entity to activate the setting.
Enable
Setting Description Factory Default
Enable Enables MAC filter Disable
Disable Disables MAC filter
Policy
Setting Description Factory Default
Accept Only the packets fitting the entities on list can be allowed. Drop
Drop Any packet fitting the entities on list will be denied.
3-23