User Manual

AirWorks AWK-3131A Web Console Configuration
1st / 2nd Trap community
Setting Description Factory Default
Max. of 31 characters Use a community string match with a maximum of 31 alert
characters for authentication.
Status
Wireless Status
The status for 802.11 info parameters, such as Operation mode and Channel, are shown on the Wireless
Status page. The status will refresh every 5 seconds if the Auto refresh box is checked.
Certain values for 802.11 info may not show up due to different operation modes. As a result, Current
BSSID and Signal strength are not available in AP mode.
It is helpful to use the continuously updated information on this page, such as Signal strength, to monitor
the signal strength of the AWK-3131A in Client mode.
Associated Client List (for AP/Master mode only)
Associated Client List shows all the clients that are currently associated to a particular AWK-3131A. You can click
Select all to select all the content in the list for further editing. You can click Refresh to refresh the list.
3-35