User's Manual

NE-4100 Series User’s Manual Web Console Configuration
6-3
If you can’t remember the password, the ONLY way to configure the WE-2100T is to load factory
defaults by using the Reset button located near the evaluation boards’ DB9 male serial port.
Remember to use Network Enabler Administrator to export the configuration file when you have
finished the configuration. After using the Reset button to load factory defaults, your configuration
can be easily reloaded into WE-2100T by using the Network Enabler Administrator Import function.
Refer to Chapter 7 for more details about using the Export and Import functions.
Basic Settings
Click on the Basic Settings link on the left side of the screen to open the Basic Settings screen.
Make necessary changes to the settings and click on submit to validate the modifications.
Server name
Setting Factory Default Necessity
1 to 39 characters NP[model name]_[Serial No.] Optional
This option is useful for specifying the location or application of different WE-2100T.
Time
WE-2100T has a built-in Real-Time Clock for time calibration functions. Functions such as Auto
warning “Email” or “SNMP Trap” can add real-time information to the message.
First time users should select the time zone first. The Console will display the “real time” according to
the time zone compared to GMT.
If you would like to modify the real time clock, select “Local Time.” The WE-2100T’s firmware will
modify the GMT time according to the Time Zone.
Time zone
Setting Factory Default Necessity
User selectable time zone GMT (Greenwich Mean Time) Optional