User's Manual

Overview
Moxa Sub-1G module(ZB-DCU3-T, ZB-PM3-T, ZB-WAN1-T) uses ATMEL
wireless microcontroller which provides a comprehensive solution with large
memory(256KB Flash and 16KB SRAM), high CPU and radio performance and all
RF components included.
The module is a range of ultra low power, high performance surface mount
modules targeted at Sub-1G networking applications, enabling users to realize
products with minimum time to market and at the lowest cost. Sub-1G
module(ZB-DCU3-T, ZB-PM3-T, ZB-WAN1-T) can implement networking stacks,
such as ZigBee, as well as customer applications
Note:
* The Sub-1G module will implement into Moxa System’s DCU and CFE/Protecsa’s
Smart Meter application. So, it should follow Moxa System’s DCU-8620-T specification
and CFE/Protecsa AMI specification that provided by CFE company.
Features
• Support SCM setting
• Support upgrade firmware over the AIR
• Support AES-128 compatible encryption
• Support large packets fragmentation
• Support Mesh topology
Specifications
Sub-1G Interface
Internal Memory: 256KB
Flash : 256KB. SRAM: 16KB
RF Standard: IEEE 802.15.4
Frequency Band: 769 ~ 935 MHz
RF Data Rate: 20 ~ 40 Kbps (BPSK modulation)
RF Channel: 10 channel
Tx Power: +10 dBm
Rx sensitivity: -110 dBm
Distance: 900M
Serial Communication Parameters
UART Baud Rate: 50 bps to 115.2K Kbps
Power Requirement
Power consumption: RX：26 mA TX：110 mA
Operating Supply Voltage: 3.3 V