User's Manual

1314
K500HPEL
3. When you hear a dial tone, dial the second number.
4. When you’re connected to the second party, press the 3 key and the Flash
(or Talk) key to complete the three-way connection.
5. To end the conference call, hang up your home phone or return the phone
receiver to its base.
If one of the people you called hangs up during your call, you and the
remaining caller stay connected. If you initiated the call and are the first to
hang up, all callers are disconnected.
2.7 Use Call Waiting
Call waiting allows you to be notified of incoming calls while on a call.
To place the current call on hold and accept the incoming call, press the Flash
(or Talk) key on your phone. You can then press the Flash (or Talk) key anytime
to switch back and forth between calls.
To keep the current call and hang up the incoming call /the holding call， press
the 0 key and the Flash(or Talk) key；
To hang up the current call and accept the incoming call/the holding call, press
the 1 key and the Flash(or Talk) key.
Notes:
If your phone does not have a Flash (or Talk) key, use the off-hook mechanism
supported by your phone instead.
The call waiting and three-way call features need network support and may
result in additional charges. Please contact your service provider for more
information.
2.8 Forward Incoming Calls
The call forwarding feature allows you to forward your incoming calls to
another phone number, such as your mobile phone or office number. If you’ve
enabled call forwarding, your home phone will not receive calls until you turn
this service off.
Note: Airtime applies to forwarded calls even if you send the call to landline
phones. Contact your service provider for assistance on how to set an
available option (Always forward, When busy, When unanswered, or When
unreachable).
2.9 Use TTY Mode
Your K500HPEL is compatible with TTY devices. A TTY device can allow people
who have hearing or speech disabilities to communicate by telephone.
To set the TTY mode or turn TTY support off, dial *955*889*n# on your
connected phone, replacing n with one of the following numbers:
• Replace n with 0 for TTY Off mode. Users who can hear and talk can turn off
TTY support.
• Replace n with 1 for TTY Full mode. Users who cannot talk or hear can use
this mode to send and receive text messages through a TTY device.
• Replace n with 2 for VCO mode. Users who can talk but cannot hear can use
this mode to talk through the phone and receive responses via text messages.
• Replace n with 3 for HCO mode. Users who can hear but cannot talk can use
this mode to listen to calls and respond via text messages.