User's Manual

protecting your network and connected devices from malicious internet attacks. In this
section you can “enable” or “Disable” for Firewall/IP Filter settings.
Please note that in order to enable IP Filter, the Firewall must be enabled firstly.
IP Filter
You can filter the packages by IP address, Protocol, Port number. IP Filtering’s
configuring includes LAN IP address, LAN port, WAN IP address, WAN port and Protocol
functions.
- Whitelist: Set the websites that users are allowed to access. If the whitelist is empty,
users will not be able to access the Internet.
- Blacklist: Set the websites that you do not want users to access.
-The value range of LAN/WAN Port is 1-65535.
-Settings will not take effect until the “Apply” button is clicked.