User's Manual

Installing the LTE SIM Card
If you have not already done so, please follow these instructions for the installation of your new SIM card which is in the
package:
1. Remove the SIM card from the outer card, being careful not to touch the gold contacts.
2. Turn the power off. Remove the battery cover and take the battery out. Locate the SIM card slot. Hold the card so the
writing on the back of the card is facing you and the gold contact points are properly aligned with the SIM card slot.
3. Insert the SIM card into the slot until it is fully inserted.
NOTES:

The SIM card MUST remain in your K779HSDL when in use. Once the SIM card has been inserted into the K779HSDL,
do not remove!

Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water or dirt.
Inserting and Charging the Battery
1. Use the thumb catch at the bottom of your K779HSDL to open the battery cover and align the battery contacts with the
terminals in the battery compartment as shown. Push the battery down until it clicks into place.
2. Place the battery cover over the battery compartment and press it downward until it clicks into place.