User's Manual

3. Your K779HSDL comes with charger. To charge: Plug one end of the charger into an electrical outlet and the other end
into the K779HSDL’s Micro USB Port.
Removing the LTE SIM Card
1. Turn the power off. Remove the battery cover and take out the battery.
2. Gently remove the SIM card from the SIM card slot.
Connecting to the Internet
With your K779HSDL, a wireless Internet connection can always be at your fingertips.
Connecting Wi-Fi Enabled Devices To Your K779HSDL
NOTE: It is recommended the battery be fully charged in order to use your K779HSDL via Wi-Fi for the first time, or connect
the device to the adapter for power.
Follow these Steps:
1. Use your normal Wi-Fi application on your computer to establish a connection to your K779HSDL.
2. Look for the network (SSID) named “Moxee TetherXX_2.4G” or “Moxee TetherXX_5G”.
XX is the last two digits of device IMEI.
3. Click Connect and enter the default username and password printed under the battery of your K779HSDL.
NOTE: Your WiFi SSID and password will also be displayed on the K779HSDL screen each time the K779HSDL is powered
on.
Setting up your WPS
If your terminal support WPS, you donot have to input the password manually once your WPS has been set up. To use WPS
please follow these steps:
1. Enable WPS in the WebUI through Settings->Wireless->WLAN Settings->WPS
2. Press “Menu” button on the device to select “WPS Active”page on the LCD