6 Get Connected System specifications ......................................................................................... Before connecting.............................................................................................. Available ports ................................................................................................... Connect to the TV and receiver.......................................................................... Connect archiving components.......................
Get Connected Use the audio, video, and additional data storage ports available when connecting your Moxi 3012 to the TV. Table 2: Moxi 3012 specifications (Continued) System specifications Feature Quantifier Operating temperature 0 degrees Celsius to 40 degrees Celsius (32 Fahrenheit to 104 Fahrenheit) from 5% to 90% non-condensing relative The following table lists the specifications for the Moxi 3012.
Get Connected Ventilation requirements Available ports To prevent overheating, allow adequate ventilation and airflow around the Moxi. The Moxi 3012 requires at least a two-inch (5 cm) clearance on top and all sides with airflow to the rear. 2 inches (5 cm) 2 inches (5 cm) Any Moxi set-top box 2 inches (5 cm) Before connecting the Moxi 3012, consider the equipment to which it will be connected.
Get Connected Table 3: Video cables, starting with highest quality connection (Continued) Connector shapes Y PB PR V Cable type Description Component A three-wire analog video connection capable of displaying 480i, 480p, 720p, and 1080i video resolutions from the Moxi. Component is the most user-friendly HD and standard video connection for the Moxi. S-Video An analog video connection with better quality than Composite. S-Video is capable of displaying 480i video from the Moxi.
Get Connected Table 4: Audio cables starting with highest quality connection (Continued) Connector shapes L R Cable type Description RCA An analog stereo audio connection. No need to use an RCA cable, if using an HDMI video cable connection (transmits both video and audio). 6 Table 5: Data storage cables starting with highest quality connections Connector shapes Cable type Description eSATA Transfers data at a rate of 2400 megabits per second to and from external hard disks and optical drives.
Get Connected Connect to the TV and receiver The Moxi 3012 supports multiple types of audio and video connections. It is recommended that you use the highest-quality connection supported by both the TV or audio receiver and the Moxi. Before installing or connecting the Moxi 3012, review all instructions and the Regulatory Information and Product Safety Information and Warnings document. ! Do not plug the Moxi 3012 into a power source just yet.
Get Connected • For HD and supported TVs, connect an HDMI cable between the Moxi 3012 and the HDTV (refer to the previous figure on page 56). If an HDMI cable or an HDMI to DVI conversion cable is used along with an intermediate device such as an audio/video receiver, video might not be passed through the intermediate device to the TV. If this happens, connect the Moxi 3012 directly to the TV. • • • If an HDMI connection is unavailable, connect component (YPbPr) cables for HDTV.
Get Connected right protection systems, the picture on the additional component may appear distorted or not at all. Moxi DVR Signal flows from the Moxi DVR to the TV and also to the VCR or other secondary device. Never install the secondary device in the primary connection between the Moxi DVR and the TV. Variations in VCR and TV technology present many connection options. Determine which connection is used between the TV and the Moxi, and then use an alternate connection to the VCR.
