User Manual

When the follow function is enabled, the camera will follow the movement of the

gimbal.

Users can enable the follow mode of each axis thru dial buttons and turn the dial to

adjust the following speed, which can be also enabled in the menu.

Note:

1. The AirCross 2 is in pan follow mode by default.

2. In addition to switches that enable the follow mode of each axis independently,

commonly used follow modes can be also enabled by trigger, please refer to

Page4 ‘Button Functions’ for more details.

3. The angle of the roll follow is 45°. For a larger following angle, please triple click

the left button to enter the FPV mode to achieve 360° follow of three axes.

4. If faster following speed is required, please click the right button to enter the

sport gear mode. (Currently only supports the pan axis)

PFV, Sport Gear Mode

Enter the

tilt follow

Exit the

tilt follow

Enter the

roll follow

Exit the

roll follow

Follow Mode

Switch

Example 1 Example 2