User Manual

11
Inception Mode
Button Customization
Manual positioning is used to quickly adjust the lens orientation. When manual positioning
is enabled, turn the camera orientation by hand and the camera will stay in the nal
direction without returning to the initial position. The adjustment speed is faster than that of
using the joystick control or follow control.
The manual positioning of the tilt axis is enabled by default on the AirCross 2. Manual
positioning of the roll and pan axes can be enabled in the menu.
The Inception Mode is used to control the camera to rotate in the roll direction for
shooting upside down and rotating footages. In the main interface, triple click the right
button to enter the Inception Mode.
After entering the Inception Mode, the camera lens is vertically up and each axis
automatically follows.
Button Denition for Inception Mode:
● Turn the joystick left or right: the gimbal turns to left or right, when release or turn
The higher the sensitivity of the button, the more sensitive and faster the control is. If
you change the 'custom' to -, the direction of operation will be opposite. For more
button customization, please refer to
Page6 Menu Description.
Note: The follow function has higher priority than manual positioning. When the
follow function of any axis is on, the manual positioning function cannot be used.
Only after the follow function is o, the manual positioning can be used normally.
Manual Positioning
off
off
相机
高级
通用
pan
Button Customization is used to specify the function, sensitivity and operation
direction of each button according to the user's habits.
For Example:
By default, moving the joystick up and down controls the tilt axis rotation. It can be
changed to control the roll or pan axis rotation by customizing;
By default, moving the joystick left and right controls the pan axis rotation. It can be
changed to control the tilt or roll axis rotation by customizing.
to a specied angle, the gimbal stops.
● Turn the dial: adjust the rotation speed
● Press the left button on the dial once: the gimbal rotates to the left automatically.If
the gimbal is rotating, press once to stop.
● Press right button on the dial once: the gimbal rotates to the right automatically.If
the gimbal is rotating, press once to stop.
● Press up/down button on the dial: select rotationangle
● Normal: gimbal rotatesand does not stop automatically
● 180: the gimbal rotates 180° and stops automatically.
● 360: the gimbal rotates 360° and stops automatically.
camera > balance chk tilt [off] tilt [on]
g
imbal > iFocus > roll [off] roll [off]
a
dvanced > inception > pan [ on] pan [ on]
g
eneral > manual pos >
camera > motor > joystick > function > left-right [pan]
g
imbal > follow > wheel > sensitivity > up-down [tilt
]
a
dvanced > operation > trigger > habits >
g
eneral > dial >