User Manual

14
User Conguration Management
The AirCross 2 can save 3 groups of user data like camera type, motor output, button
operations and other parameters, so users can retrieve relevant parameters previously
used and avoid trouble of setting parameters each time when changing the camera.
When conguration data is confusing, users can select “restore conguration” to clear
all previous conguration data.
Notes:
1.The oset can only adjust the angle of each axis within the range of about ±5°, if there is too
much oset, the camera cannot be completely leveled. 2.Oset is only a temporary solution, after
shooting, accelerometer calibration is still needed. 3.The parameters of the oset will not be saved
and will become invalid after restart.
The AirCross 2 supports both Chinese and English. After turning on the gimbal, users
can switch language in the menu.
Language Switch
camera > iFocus > gyro tilt [0] tilt [1]
gimbal > inception > acc roll [0] roll [0]
advanced > manual po
s >
>
a
ngle offs
et
> pan [0] pan [0]
general > calibration >
camera > language > English English *
gimbal > config > 中文 * 中文
advanced >
general >
about
camera > language > config1 > save
gimbal > config > config2 > load
advanced > config3 >
general >
about
reset