User Manual

16
The AirCross 2 is equipped with BLUETOOTH 4.0 and can be connected with
smartphones. Users can set parameters, shot time-lapse video, upgrade rmware and
make other operations via the MOZA Master App.
With a Type-C USB interface, the AirCross 2 is able to be connected to a computer.
Users can set parameter, upgrade rmware and make other operations via the MOZA
Master software.
Download Link: https://www.gudsen.com/moza-aircross-2
Note:
1. The MOZA Master supports iOS, Android, Windows and MacOS
2. Before using the MOZA Master on computer, please install the driver rst,
otherwise the computer cannot recognize the AirCross 2
3. Smart phones cannot directly pair with the AirCross 2 via Bluetooth, MOZA
Master App must be used to connect your phone with the AirCross 2
Upgrade via computer:
a.Turn o the gimbal.
b.Long press the center button, then press the power button with the other hand
until the prompt ‘Boot Mode’ appears on the screen.
c.Connect the gimbal to the computer with a USB Type-C cable.
d.The software will automatically identify the device and load the rmware. Press
the ‘Upgrade’ button and wait for about 30s.
e.Restart the gimbal after the upgrade.
Smartphone and PC Connection
Firmware Upgrade
Install the phone on top of the camera.Operate object tracking through App.
a. Fix the phone holder to the hot shoe connector on the top of the camera
b. Place the phone horizontally in the phone holder
c. Open the App.Enter the object tracking feature. Adjust the phone angle. Make the
phone framing as consistent as possible with the camera framing.
In addition to being mounted on the top of the camera for object tracking, the
phone holder can also be used to fasten the phone to tripod head for mimic motion
control.
Install the Phone Holder