User Manual

2
Installing the Battery
a. Press the battery lock downwards;
b. Take out the battery;
c. Remove the insulating lm at the
electrode;
d. Attach the battery electrode to
the gimbal.
e. Press the battery into the hatch
Attaching the Tripod
Attach the tripod to stand the gimbal.
a. Screw the tripod tightly into the 1/4" hole at the bottom of the gimbal.
b. Expand three support feet, place the gimbal on a at surface
Unlocking Motors
The AirCross 2 gimbal has 3 locks which are used to lock motors to prevent rotation.
Installation and Balance Adjustment
Notes: Please unlock all motor locks before starting on the gimbal, otherwise motors will get
overheated or enter the protection mode.
3 Motor Locks Unfolding Storage
a
b
e
d
a b
c