User's Manual

When the follow function is enabled, the camera will follow the movement

of the gimbal.

Users can enable the follow mode of each axis through dial buttons and

turn the dial to adjust the following speed, which can be also enabled in

the menu.

Note:

1. The AirCross 2 is in pan follow mode by default.

2. In addition to controlling the follow mode by the switches of each

axis independently, follow modes can be also enabled by the

trigger, please refer to Page9 ‘Button Functions’ for more details.

3. The angle of the roll follow is 60°. For a larger following angle, please

triple click the left button to enter the FPV mode to achieve 360°

follow of three axes.

4. If faster following speed is required, please click the right button to

enter the sport gear mode. (Currently only supports the pan axis)

FPV, Sport Gear Mode

Enter the

tilt follow

Exit the

tilt follow

Enter the

roll follow

Exit the

roll follow

Follow Mode

Switch

Example 1 Example 2