User's Manual

The AirCross 2 is equipped with BLUETOOTH 4.0 and can be connected

with smartphones. Users can set parameters, shot time-lapse video,

upgrade firmware and make other operations via the MOZA Master App.

With a Type-C USB interface, the AirCross 2 is able to be connected to a

computer. Users can set parameter, upgrade firmware and make other

operations via the MOZA Master software.

Download Link: https://www.gudsen.com/moza-aircross-2

Note:

1. The MOZA Master supports iOS, Android, Windows and MacOS

2. Before using the MOZA Master on computer, please install the driver

first, otherwise the computer cannot recognize the AirCross 2

3. Smart phones cannot directly pair with the AirCross 2 via Bluetooth,

MOZA Master App must be used to connect your phone with the

AirCross 2

Upgrade via computer:

a.Turn off the gimbal.

b.Long press the center button, then press the power button with the

other hand until the prompt ‘BOOT MODE’ appears on the screen.

c.Connect the gimbal to the computer with a USB Type-C cable.

d.The software will automatically identify the device and load the

firmware. Press the ‘Upgrade’ button and wait for about 30s.

e.Restart the gimbal after the upgrade.

Smartphone and PC Connection

Firmware Upgrade

Install the phone on top of the camera.Operate object tracking through

App.

a. Fix the phone holder to the hot shoe connector on the top of the

camera

b. Place the phone horizontally in the phone holder

c. Open the App.Enter the object tracking feature. Adjust the phone

angle. Make the phone framing as consistent as possible with the camera

framing.

In addition to being mounted on the top of the camera for object

tracking, the phone holder can also be used to fasten the phone to

tripod head for mimic motion control.

Install the Phone Holder