User's Manual

5
Note:
Violent rotation of each arm in the locked state may cause motor locks to malfunction;
It is strictly forbidden to turn on the AirCross 2 in the locked state, otherwise it will cause
motors to heat up and enter the protection state.
Battery Storage
● IThe storage temperature for battery must be in the range of -20 ° C ~ 45
° C.
● For long-term storage(more than 3 months), batteries must be placed in
an environment with a temperature of -20 ~ 25 ° C and a humidity of 65 ±
20% RH.
● For long-term storage, batteries should be fully charged and should be
recharged once a month.
2. Motor Lock Use Instructions
The AirCross 2 is equipped with 3 motor locks that are used to secure the
gimbal axes. After receiving the product, please check if the motor locks
are in the locked position. Please unlock the gimbal axes first before using it.
Motor locks are used for:
a. Locking all three axes for easy carry.
b. Securing certain axes when mounting the camera and adjusting the
balance.
c. Fixing the body to prevent collision and friction.
d. Keeping good posture when placed statically.
3. Notes for Abnormal Situation
Wrong Camera Mounting Direction
The tilt axis of the MOZA AirCross 2 can be rotated 360°. When mounting
the camera, please follow the red arrow indication to keep the elliptical
end of the tilt axis aligned with the lens direction.
Transportation Safety
The AirCross 2 contains sensitive accelerometers and gyro sensors that
may experience sensor drift after severe vibrations. After receiving the
product, please follow instructions in the manual to mount the camera. If
the camera cannot keep level after turning it on, please calibrate the
gyroscope and accelerometer to ensure normal use.