User's Manual

7
Installing the Battery
a. Press the battery lock downwards;
b. Take out the battery;
c. Remove the insulating film at the
electrode;
d. Attach the battery electrode to
the gimbal.
e. Press the battery into the hatch
Attaching the Tripod
Attach the tripod to stand the gimbal.
a. Screw the tripod tightly into the 1/4" hole at the bottom of the gimbal.
b. Expand mini tripod, place the gimbal on a flat surface
Unlocking Motors
The AirCross 2 gimbal has 3 locks which are used to lock motors to prevent
rotation.
Installation and Balance Adjustment
Notes: Please unlock all motor locks before starting on the gimbal, otherwise motors
will get overheated or enter the protection mode.
3 Motor Locks Unfolding Storage
a
b
e
d
a b
c