User Manual

Mounting your camera
Balancing the Tilt Adjustment Arm
Balancing the Roll Adjustment Arm
Balancing the Yaw Adjustment Arm
Balance the camera
1.Please place the camera on the quick release plate, aim the 1/4" threaded hole at
the bottom of the camera with the empty slot of the mounting plate.
2.then tighten the secure screw on the quick release system.
1.Please move the camera forward and
backward until you find a position where the lens
face front and the camera can keep complete still.
2.Tighten the camera lock-knob.
1.Please loosen Tilt Adjustment Screw and adjust the Tilt
Adjustment Arm until it remains still with the lens facing
vertical or toward the ground.
2.Once balanced tighten the Tilt Adjustment Screw.
1.Please loosen the quick Release system adjustment
screw, be sure to leave a little space between the camera
and the motor, in this case move the quick release plate to
the till motor as possible as you can, then tighten the quick
Release system adjustment screw.
2.Please loosen the Roll Adjustment Screw and adjust
the Roll Adjustment Arm until the camera remains still and
level with the horizon.
3.Once balanced tighten the Roll Adjustment Screw.
1.Please loosen the Yaw Adjustment
Screw and adjust the Yaw Adjustment Arm
until the camera remains still and level with
the horizon.
2.Once balanced tighten the Yaw
Adjustment Screw.
Moza Air User Manual
Balancing
07 08