User Manual

Part1: Moza Air Firmware Update Tutorial.
Firmware Update
This tutorial contains two parts：
Moza Air firmware update tutorial.
Wireless thumb controller firmware update tutorial.
Notice:
Attention：All the firmware files are available on the server, Gudsen has not released
any Moza product firmware update packages on the network. The only access to do the
update is upgrading via Moza Assistant software.
Step 1：Download Moza Assistant
Please download the Moza Assistant from here: http://www.gudsen.com/moza-air-
downloads.html, and select the proper software according to your computer operating
system.
Download the software package and unzip the files and install the driver.
Please refer to the link below if your Mac computer reject the driver installation and
get the error message like the picture suggested:
http://www.iclarified.com/28180/how-to-open-applications-from-unidentified-
developers-in-mac-os-x-mountain-lion
Step 2：Enter upgrade mode and start to upgrade
①Plug in the Moza Air on the computer and run the Moza Assistant software.
②Hold down the joystick and quick press the power button on the Moza Air, the
LED will turn to solid blue and the below software interface will pop up.
③Click on "Upgrade” button to start the update. It will take about 1 to 2 minutes
to finish it, the software interface will show on when the upgrade is finished：
④Turn off the Moza Air first (important!), then close the software, and long pressing
the power button to turn on the Moza Air （Not enter upgrade mode, just regular power
on the gimbal）and run the Moza Assistant software again.
Moza Air User Manual
Firmware Update
11 12