User Manual

Gyroscope and Accelerometer Calibration
Advanced time lapse
Click on the “Gyroscope/Accelerometer Calibration” button on the device page
and this notification will show on. Please click on “OK” button to go on the calibration.
Then begin with the gyroscope calibration as the pictures shown below, you can go
back to the device page by clicking on the white triangle button. It takes 5-10 seconds
to finish gyroscope calibration, leave the Moza Air alone and keep it still during the
calibration.
After the gyroscope calibration then begin with the accelerometer calibration. Please
loosen the quick release plate secure screw at first, then follow the picture to adjust it at
the correct position, make sure camera holder is horizontal, then click on “Start” to do
the accelerometer calibration. It takes about 5-10 seconds to finish the accelerometer
calibration.
①Mount the camera on the Moza Air then turn it on
②Set the camera on Manual Focus mode, set camera shutter, ISO, aperture and turn
off the SteadyShot feature of the camera(Here we use Sony camera as an example in the
tutorial).
③Turn on mobile phone Bluetooth, run the MOZA Assistant App and connect it to
the Moza Air.
④Enter the App main interface, select parameter setting, and switch your current
camera model (Here we use Sony camera as an example in the tutorial) and save it. More
information Please refer to the Support Camera Form at page 9.
⑤Connect the camera to the Moza Air with the camera control cable and go back
to the Home page and select Advanced Time-Lapse
⑥Use the app to set the camera movement.
Notice: Up to 8 points can be add on the motion time-lapse.
Moza Air User Manual
Advanced time lapse
23 24