User Manual

Pair
1. Choose Pair and move the joystick rightwards to enter the secondary menu.
2. Move the joystick downwards to choose the YES option
3. Move the joystick rightwards again to enter the Pairing mode. The interface of
Pairing will appear. Then turn on Moza Air, the screen of the thumb controller shows OK
in 5 seconds.
Note:
If the OK confirm is not shown on and you get a ‘Pair ERR’, please power off the
Moza Air then turn it on and try it again. If the pair still fails, please check and update
the firmware of your gimble and wireless controller then try to pair them again (Keep
both device firmware the most up to date).
Save:
Save the current setting at the Moza wireless thumb controller or it will go back to
the last saving parameter.
Confirm to save and the OLED display will show“Set OK”, if it shows“Set ERR”
then try the saving again.
Camera
More information please refer to the page 9 and learn the compatible camera
brands which can trigger the picture taking or video shooting on the Moza Air.
Tips: Select“OTHER”profile and plug the shutter cable to the camera ，double click
on the power button on the handgrip to trigger the camera photo taking, or the advance
time-lapse..
Profile
There are 4 sets of parameters are optional for different camera and lens in different
weights. Please begin with profile 4. If you get the vibration with the current profile, select
a lower one until the vibration is gone. Or you can try the Auto-Tune, which will tune the
parameters automatically one time.
Motor
Turn on or off the motor.
Follow
“Follow Enable: is set to enable or disable the follow function at the current
Adjustment Arm.
Moza Air User Manual
Wireless Thumb Controller
29 30