User manual PdfEditor 4.0.0.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Acquaint AirCross S 1. L-shaped Quick Release 8 2. Quick Release Pad 3. Quick Release Knob 1 4. Bolt 2 5. Pan Knob 3 10 6. Menu Button 4 5 11 8. Tilt Storage Lock 6 12 13 9. Roll Knob 7 7. Joystick 9 10. Roll Motor 11. Roll Storage Lock 12. Screen 13. Indicator 14 14. 1/4" Port 15. Tilt Motor 15 16. Roll Arm 16 21 17. Pan Arm 22 18. Pan Storage Lock 19. Power Button 17 18 19 20 23 20. USB-C Port 24 21. Tilt Knob 25 26 22. Camera control Port 23. Pan Motor 24.
Store and Expand the AirCross S AirCross S is equipped with a three-axes storage lock for gimbal storage and leveling. 1.Unlock the pan storage lock, roll storage lock and tilt storage lock to turn on the three-axes motor. Tilt Storage Lock Roll Storage Lock Pan Storage Lock 2.Rotate the roll arm 90° counterclockwise, and then lock the roll storage lock. Mounting and Balancing the Camera · Tilt Axis Leveling 1.
4.(From a left view,) Rotate the tilt arm 90° clockwise, loosen the tilt knob, adjust the tilt arm left and right until the lens is straight up (leveled), then lock the knob. Note: How to judge whether the tilt axis is leveled? Answer: Once the tilt axis is leveled, the lens can maintain balance and stability at any angle · Roll Axis Leveling 5.(From a front view,) Unlock the roll storage lock, loosen roll lock, adjust the roll arm left and right until it is balanced horizontally, and then lock the knob.
