User's Manual
8
ŏ )LUPZDUH8SJUDGHYLD0RELOH$SS
a. When the gimbal is powered off, long press the center button,
then press the power button with the other handuntil the battery
indicator start flashing (Boot Mode).
b. Start the MOZA Master App, press Bluetooth to search for device
then connect it.
c. The App will automatically enter the firmware upgrade interface,
After the firmware download is complete, click the "Upgrade"
button to start the upgrade.
d. After the upgrade is complete, turn the gimbal off and back on
again. Then calibrate the gyroscope and accelerometer to get
started. You can connect to the “MOZA Master App” to check
the version number of the Mini-P.
ŏ Calibration
The MOZA Mini-P needs to be calibrated when:
a. The device works abnormally;
b.There is a deviation in the horizontal angle after the gimbal is
turned on (not leveled), and it is unable to resolve after one-click
re-center;
c. Deviation caused by the environment in which the gimbal is used.
Calibration method: Please scan the QR code at the end of the
page for details.
ŏ 0RELOH$SS
If you use the camera on the gimbal, you can scan the QR code to
download the MOZA Master App, or you can search for "MOZA
Master" directly in the mobile app store to download. (See App
download QR code at the end of the page)
Note:
1. Make sure the gimbal is fully charged and the computer or
mobile phone network connection is normal during the upgrade.
2. Do not disconnect the gimbal from power, USB-C cable or
Bluetooth during the upgrade, otherwise the upgrade will fail.
3. When using the App upgrade, the upgrade process takes a
ORQJHUWLPHSOHDVHZDLWSDWLHQWO\'RQRWH[LWWKHDSSWRWKH
background, and do not turn off the screen to avoid upgrade
failure.
4. If all fails, reboot the gimbal and try to upgrade again until the
upgrade is completed.
Note:
1. The mobile phone system supported by MOZA Master are iOS
and Android.
2. Smartphone cannot be paired with the gimbal directly via
Bluetooth. You must use the MOZA Master App to connect.