Warranty

In no event will Nan Ya Plastics Corporation USA be liable to the homeowner or any other person for general,
incidental or consequential damages. Nothing herein guarantees safety for persons or property, or guarantee
that the premises will be hurricane proof or impact proof. The remedies set forth herein are the original pur-
chaser’s exclusive remedies for breach of warranty. This limited warranty is not transferable and only applies
to doors installed in single family, owner occupied dwellings within the continental United States. The date of
manufacturer shall be the commencement date for the durations of the limited warranty should the purchase
date not be established through written documentation. The purchase price is the consideration for the limited
warranty.
The following Exclusions are not covered and shall otherwise not be considered to be defects in material or
workmanship as applied to this limited warranty:
• Damage due to improper installation or maintenance not in adherence with the manufacturer’s written
instructions
• Damage due to improper handling or storage
• Damage due to modication or alteration of the door system, including installation of a peephole, pet door,
mail slot or kickplate
• Damage due to use of a storm door
• Damage due to freight carriers, common carriers, private transportation, or any other transportation, and
handling upon arrival to destination
• Damage due to transportation after the door system is in the possession of the customer
• Damage concealed by packaging that is not reported within 5 calendar days of receipt of product
• Damage due to accident, abuse or improper use
• Damage due to misuse, neglect, vandalism, or impact by foreign objects.
• Damage due to re, explosion, corrosive fume, condensate damage, acts of God or any other events
beyond the control of Nan Ya Plastics Corporation USA
• Damage due to improper maintenance and exposure to abrasive and corrosive materials, chemicals or
cleaners
• Warp not exceeding ¼” in the plane of the door panel, bow or misalignment in the door frame in which the
door panel is hung
• Stress due to localized application of heat, movement of building or building components, or due to expan-
sion or contraction of building or building components
• Any failure of the structure into which the door is installed
• Discoloration of the factory nished door may occur when exposed to extreme sunlight. Discoloration that
is within the accepted tolerances contained within Delta E 7 according to ISO 11341-2004 for stains and
paints is excluded.
• Unnished doors and door components must be painted or stained within 45 days of receipt. Discolor-
ation, variations or changes in the color and chalking of the unnished door components is excluded.
• Condensation on the door or glass
• Discoloration or irregularity in glass that is not visible from farther than 6 feet
• Due to the nature of decorative glass, it is expected that there will be slight inconsistencies in caming and
beveled glass pieces. Such inconsistencies are not warrantable.
• Small marks, scratches and spots which do not exceed company standards or federal government speci-
cations. C 1036-85
• Glass breakage after sale
• Discoloration of hardware nish after ONE (1) YEAR
Exclusions
Limitations