Technical Specifications

ManualsBrandsMP Global Products ManualsElectric In-Floor HeatingInsulayment Underlayment (100 sq. ft.)

A D V A N T A G E S

• Sound absorption.

Insulayment’s laments are randomly air-laid creating a

capillary affect to cushion the oor, absorb sound, and help

make laminate oors sound more like real wood.

Field Impact Insulation Class (F-IIC) = 60

Impact Insulation Class (IIC) = 52

Sound Transmission Class (STC) = 53

• Smoothing out minor sub-oor imperfections.

Insulayment

is rm enough (density = 18.9 lbs/ft

; compression

resistance @ 25% = 23.2 psi) to support the overlaying oor,

but exible enough to form around sub-oor surface roughness

that may otherwise cause laminate panels to “rock” or lay

unevenly.

• Adding insulation value.

Insulayment will add a thermal “break” to the ooring assembly

with an r-value of approximately .50.

• Approved for use over in-oor heat systems.

The patented process used to make Insulayment

creates a

three dimensional ber matrix that allows heat to permeate

evenly while helping to protect the oor covering material from

thermal shock.

• Multipurpose.

Insulayment can be used under all types of industry approved

suboors.

QUIETWALK.COM

Insulayment

Sound- and Crack-Suppression Insulating Underlayment

Multi-purpose Flooring underlayMent that insulates,

deadens sound & suppresses CraCks

Insulayment is a unique, earth-friendly, insulating underlayment

that helps absorb impact sound so it won’t transfer to lower level

rooms; suppresses the effect of concrete sub-oor cracking

to protect ooring from potential plank gapping; and insulates

oors to help keep them warm in the winter and cool in the

summer. The 0.11” thickness of Insulayment also helps smooth

out imperfections in substrates prior to the installation of a

hard-surface oor covering.

E N V I R O N M E N T A L A T T R I B U T E S

• Insulayment is certied by Scientic Certications Systems

(SCS) to contain 100% post industrial/pre-consumer bers.

Insulayment is LEED™ compliant and will contribute to MRc4.1-

4.2 credits.

• Passed Section 01350 for CHPS and Standard Ofce

• CHPS-listed product

• Makes contributes to LEED MR Credit 4.1-4.2

L I M I T A T I O N S

• All sub-oor assemblies should be tested for moisture vapor

emission rates by utilizing anhydrous calcium chloride test

kits for concrete or a certied moisture meter for wood.

Do not install ooring material when in excess of ooring

manufacturers recommendations for moisture vapor emissions.

Think Green!Think Green!Think Green!

Certified recycled and

healthier indoor air quality

Summary of content (2 pages)

PAGE 1
Think Green! Certified recycled and healthier indoor air quality Insulayment is a unique, earth-friendly, insulating underlayment that helps absorb impact sound so it won’t transfer to lower level rooms; suppresses the effect of concrete sub-floor cracking to protect flooring from potential plank gapping; and insulates floors to help keep them warm in the winter and cool in the summer. The 0.
PAGE 2
A P P R O V E D S U B S T R A T E S • Dry, completely cured concrete (at least 28 days old) • Concrete and masonry blocks • Cement backer units (CBU) • Cementitious screeds, leveling coats and mortar beds • Waterproofing and crack-isolation membranes • Double layered exterior-grade plywood 1 ¼" (32 mm) total thickness, for residential floors and in dry areas only.