Instruction manual

5
REMOTE CONTROL OPERATION
MUTE
Press MUTE to turn off the audio.
Press MUTE again to resume normal sound.
R/L
During VCD/SVCD playback, press R/L repeatedly to select the
channel of audio-output: Left / Right / Mix / Stereo.
CLEAR
Press CLEAR to delete the numbers you have entered.
PLAY/PAUSE
Press PAUSE during playback to pause playback.
Press again to step forward one frame
Press PLAY to resume normal palyback.
NOTE:the step function is not available during CD playback
STOP
Press STOP once during playback to stop and hold playback.
Press PLAY to resume playback from the point you have pressed STOP.
Press STOP twice to stop playback completely.
RETURN
When the PBC is on, press return ,and you can select once again from the menu displaying.
This function is only valiable to VCD.
ZOOM
During VCD/SVCD/DVD/MPEG4 playback, press ZOOM to magnify the image
This function can zoom,can't lessen
as follows:
Q 1 Q 2 Q 3
Q off
STEP
When playing
PLAY to resume normal play.
Press the SETUP button on you remote control to access the setup menu.The setup menu is a
Multi-level
Use the ▼ or ▲ buttons to select the menu option that you need.
Use the and to go back to previous level menu or to enter the next level menu.
Press ENTER button to confirm selection.
Press SETUP button to exit setup.
SETUP
Menu.
MPEG4/DVD,VCD ,SVCD disc ,press STEP once , the picture changes to next frame ,Press
RESET
Under the stop mode,Press this key to reset the DVD player to default mode,this will not recover your
Password set up.