Manual

SERIES 700
4" x 3" End Suction Centrifugal Pump
ANSI A-40 design SERIES 700 centrifugal pumps are available in ductile
iron construction with stainless steel fasteners and choice of either
mechanical seal or stuffing box design. With enclosed impeller, capacities
range from 900 GPM with heads up to 170 feet.
Enclosed impeller is dynamically balanced to improve efficiency and
bearing life. Standard carbon / ceramic / Viton mechanical seal is self-
adjusting and corrosion resistant to handle almost any liquid. Stuffing box
packing is special graphite type with lantern ring.
Tested pumps are available with or without motors. Various impeller
diameters are available to suit different head/flow requirements.
SPECIFICATIONS:
Suction and Discharge . . 4" x 3" 125 ANSI Flanges
Materials of Construction Ductile iron
Flow . . . . . . . . . . . . . . . Up to 900 GPM
Head Feet . . . . . . . . . . . Up to 170'
Impeller . . . . . . . . . . . . 13" enclosed
Max Solid Size . . . . . . . .65"
Motor . . . . . . . . . . . . . . Up to 40 HP
Drive Options . . . . . . . . Close coupled 256JP
Pedestal
Seal . . . . . . . . . . . . . . . Special seal material combinations available
(consult factory).
Standard - carbon / ceramic / Viton
Application:
Agricultural•
Commercial•
Industrial•
OEM•