Operating instructions Multimedia PC
Multimedia PC 8 9 8 9 5 11 6 10 7 27 2 24 1 23 12 17 18 15 16 13 14 19 26 2 25 7 24 5 6 21 20 22
Connections 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 On/off switch/operating mode Microphone socket* ----eSATA connection* USB 2.0 ports* USB 3.
Contents 1.About these instructions ........................................................................................................................................................ 4 1.1.Warning symbols and key words used in these instructions ..................................................................................................................... 4 1.2.Proper use .............................................................................................................................
17.1.What is a network? ...............................................................................................................................................................................................18 17.2.Wireless LAN (wireless network) .......................................................................................................................................................................19 18.Software ...........................................................................
Personal information Please append the following to your proof of ownership: Serial numbers ................................................ (e.g. Microsoft®) ................................................ Purchase date, location ................................................ You will find the serial number on the back of the PC. Where applicable, also copy the number on your warranty documents. Our target group This operating manual is intended to be read by both first-time and experienced users.
1. About these instructions Read these erating instructions carefully before using the device for the first time. Note the warnings on the device and in the operating instructions. Always keep the operating instructions close to hand. If you sell the appliance or give it away, please ensure that you also pass on these instructions. 1.1.
2. Safety instructions 2.1. Dangers for children and people with reduced ability to operate machinery • • • This device is not intended for use by people (including children) with reduced physical, sensory or mental abilities or for those without experience and/or knowledge, unless they are supervised by a person responsible for their safety or they have been instructed in its use. Children should be supervised to ensure that they do not play with the device.
3. Package contents Please check your purchase to ensure that all items are included. If anything is missing, please contact us within 14 days of purchase. Note down the serial numbers here. The PC you have purchased includes the following components: • PC and connection cable • Windows keyboard and mouse (optional) • OEM version of the operating system (optional) • Documentation DANGER! Keep packaging material such as plastic film away from children. There is a risk of suffocation if used improperly. 4.
Sitting for long periods without changing your position can be uncomfortable. To minimise the risks of physical discomfort or damage, correct posture is paramount. • General – Alter your position frequently (every 20–30 minutes) and take frequent breaks to avoid fatigue. • Back – When sitting at your workplace, the backrest of the office chair should be upright or tilted slightly backwards to supported your back. • Arms – Your arms and elbows should be relaxed and loose.
5. Connecting For better orientation, please open out the left-hand inside cover page to fully display the diagrams showing the positions of the connections described. PLEASE NOTE! The devices listed are not necessarily supplied! The connections listed are optional and are not necessarily present on your PC. 5.1. Connecting the cables Follow the instructions below to connect your PC correctly and safely: • Position the cable so that it cannot be stepped on or tripped over.
5.4. Connecting SATA devices (optional) eSATA stands for “external Serial ATA” and is a connection for external hard drives. Compared with the conventional USB standard, the transfer speed with an eSATA connection is higher than with external USB hard drives. PLEASE NOTE! In order to prevent damage to the contacts, make sure that the plug and the socket fit together perfectly. Due to its asymmetric form, the plug will only fit into the socket in one position.
5.6. Connecting a monitor (optional) Your PC is equipped with a VGA and/or a DVI connection. PLEASE NOTE! If your monitor has multiple inputs (e.g. VGA and DVI), only ever connect one data cable at a time (to prevent signal mapping problems). To prevent damage to the contacts, ensure that the plug and socket fit together exactly. Due to its asymmetric shape, the plug will only fit into the socket in one position. Connect your monitor’s data cable to the graphics connection on your PC.
5.11. Connecting IEEE 1394 (FireWire) devices (optional) ATTENTION! Do not connect your IEEE 1394 devices until you have finished the initial setup of your new PC. This will prevent any unnecessary interference during the installation. These devices can generally be connected while the PC is running. Please refer to the operating manual for your peripheral device. • The PC’s IEEE 1394 voltage outputs are protected by a fuse (limited power source in accordance with EN60950).
6. First use The operating system and all hardware drivers are already preinstalled. You do not need to run any of the discs supplied. For some programs (e.g. telephone CDs or encyclopaedias, it may be necessary to insert the relevant disc in order to call up the data saved on it. Where this is the case, the software will prompt you to do this. Once all connections have been established and all necessary connections have been screwed tight, you can start up your PC: 6.1.
7. The mouse In addition to the two buttons, the mouse also has a wheel. Turn or press the wheel to scroll through documents or Internet pages. PLEASE NOTE! The wheel can also be used as a button. The assignment depends on the application in question. In Word, for example, the cursor changes shape and the screen display scrolls up or down in the appropriate direction when the mouse is moved. If the mouse pointer cannot be moved smoothly across the screen, please try using a different surface (mouse pad).
9. The hard drive The hard drive is your main memory medium and combines high storage capacity with rapid data access. Your PC is supplied with an OEM version** of the Microsoft Windows® operating system which supports all of the PC’s performance features. We have configured your PC’s hard drive so that you will be able to work with it optimally without having to install any additional drivers yourself.
9.2. Hot-swap mobile rack (optional) You can connect an additional external hard drive using the hot-swap mobile rack. PLEASE NOTE! Please note that only the above-mentioned mobile rack may be used. 10. The optical drive (optional) 10.1. Load disc ATTENTION! Do not use scratched, broken, dirty or poor quality discs. Do not stick protective film or other adhesive labels to the discs. The high speeds in the drive can cause these to break destroying your data and damaging your device.
10.3. Blank CDs and DVDs Normal CDs are pressed by a glass master and then sealed. With blank discs, digital information is burned onto them using the drive’s laser. They are therefore more sensitive then conventional discs. Because of this, it is essential to avoid, particularly in the case of unused blanks: • exposure to direct sunlight (UVA/UVB radiation) • scratches and damage • extreme temperatures 10.3.1.
12. The graphics system (optional) 12.1. Appearance and customisation This program gives you the option of customising the appearance on your monitor. This includes the background image, the screensaver and other settings for your monitor and your graphics card. The program can be started as follows: • Right-click on the Windows desktop and left-click on Personalise. or • Via Settings, Personalisation, Display by double-clicking with the left mouse button.
14. IEEE 1394 (FireWire) (optional) The IEEE 1394 connection, also known as iLink® or FireWire, is a serial bus standard for the rapid transfer of digital TV/video, PC and audio data. 14.1. • • • Connection of digital entertainment devices, such as: set top boxes, digital video recorders and camcorders, digital versatile discs (DVDs), televisions, etc. Multimedia applications and video editing. Input and output devices such as printers, scanners, etc. 14.2.
17.2. Wireless LAN (wireless network) Your PC is equipped with WLAN. The components (module, aerials) are already built into your PC and enabled. You can disable this function using the Windows® device manager if required. Wireless LAN enables you to establish a network connection to a corresponding remote station. 17.2.1. Security notice ATTENTION! Do not operate your PC’s wireless LAN function in areas where there are radio-sensitive devices (e.g. in hospitals, etc.).
18.3. Windows® 8 – What’s New Microsoft account A Microsoft account is an e-mail address and password for logging in to Windows. You may use any e-mail address. We recommend using the address you use to communicate with friends and log into your favourite web sites, however. The Microsoft account also allows you to purchase or download apps from the Store and install them on up to five devices.
HomeGroup With home network groups, a Windows® 8 function, connecting home computers is child’s play. A home network group is set up automatically when you connect the first PC running Windows® 8 to the home network. Adding additional PCs running Windows® to the home network group can be done very quickly. You can specify precisely what should be shared on each PC with all other PCs in the home network group.
18.5. Linking a user account to a LiveID You can link your user account to a LiveID. This enables you to log in to any computer or mobile device connected to the Internet using your LiveID. Move the mouse pointer into the top right or bottom corner of the display, move the mouse down and click Settings. Next, select Change PC settings. Open the Users category. Select Switch to a Microsoft account. Now enter your Windows Live ID e-mail address.
18.5.1. Windows® 8 Desktop This image shows a symbolic representation of additional programs. (Image similar) Information such as the following may be displayed here for example: Classic desktop apps Desktop apps are applications that are displayed on a desktop with a program thumbnail. The app thumbnails are bigger than the standard tiles. The classic “Power Recover” desktop app launches the system recovery program. The classic “Microsoft Office” desktop app launches the Microsoft Office program.
18.5.2. Working with Windows® 8 and classic apps Menu Opening an app Instructions Click the desired app with the left mouse button. Closing an app PLEASE NOTE! Not all apps need to be closed! Windows closes unused apps automatically. Press the Alt+F4 keyboard shortcut. Click on the top edge of the running app and drag the app down to the edge of the display. Displaying all apps Right-click on the Start screen. Click All apps in the bottom right hand corner of the display.
19. Control Panel The Control Panel allows you to customise the Start interface. Move the mouse pointer to the top right or bottom corner of the display and click Next, click Change PC settings. Menu Settings. Instructions Activate Windows Activate Windows by telephone or over the Internet. Personalise Set the background image for the lock screen and the Start screen here. Select a profile image here. User Create and update user accounts here. Set or modify the PIN or image code.
19.1. Control panel settings You can change Windows® 8 settings using the control panel. These settings control virtually everything about how Windows® 8 appears and functions and enable you to customise Windows® 8 to meet your requirements. When the control panel is run for the first time, some of the most frequently used control panel elements are displayed grouped together by category.
19.3.1. Running the Bios setup You can only run the configuration program upon system startup. If the PC has already been started, shut down Windows® and restart it. Before the PC reboots, press the “Del” key and hold it down until the message “Entering Setup” appears. 19.4.
19.6. Windows® 8 – Help and support Here you will find a comprehensive collection of instructions, help sections and troubleshooting suggestions. This help covers the entire spectrum of the Windows operating system. It is recommended for both beginners and experts. The information is subdivided into topics and can be printed out or bookmarked. Start as follows: Move the mouse pointer into the top right or bottom corner of the display, move the mouse down and click Settings. Now click on Help.
21.3. Faults and possible causes The screen is black. Check that the PC has not gone into hibernation. Wrong time and date displayed. Click the clock display in the taskbar. Select the Datums- und Uhrzeiteinstellung ändern option and enter the correct values. Cards in the card reader are assigned a different drive letter after rebooting. This can happen when the card reader updates its slot during system start up. New IDs may then be assigned which can lead to different drive letters for some cards.
21.7. Cleaning and care By observing the following instructions, you can extend the operating life of your PC: ATTENTION! None of the parts inside the housing require cleaning or maintenance. • • • • Always unplug the device and disconnect all cables before cleaning. Clean the PC with a damp, lint-free cloth. Dust can clog up the vents which can lead to overheating and malfunctions. At regular intervals (approx. every 3 months), check that the vents are providing a sufficient level of air circulation.
23. Recycling and disposal If you have any questions about disposal, please contact your sales agent or our service centre. Packaging Your device has been packaged to protect it against transportation damage. Packaging is raw material and can be re-used or added to the recycling system. Device At the end of its life, the device should not be disposed of in household rubbish. Enquire about the options for environmentally friendly and appropriate disposal.
