Instruction Manual

13
Connect Audio Output (Aux Out/Line Out/Earphones)
Follow below picture to connect audio cable and device.
1. Press the button to turn off power of your projector before connection.
2. Use audio cable to connect follow below figure.
3. After connect and turn on both units. Your projector sound from external device now.
4. After using, turn off both unit
Important Note:
If there is no sound from the stereo audio output when playing media contents from a set
top box, BD/DVD or streaming players connecting to the HDMI input, please check the
set top box or the player's digital audio settings and make sure it is set to "PCM Stereo"
mode.
Follow below picture to install USB and TF card
Turn off the unit before install USB / TF card.
AUDIO CABLE
AV
TF
HDMI 1 HDMI 2
DC IN
USB
Install USB Device And TF (Micro SD) Card
TF
FT
USB
AV
TF
HDMI 1 HDMI 2
DC IN
USB