Owner`s manual

Weight Plate Installation
Slide weight plates onto Guide Rod from top to bottom. The deep
groove on each weight plate needs to face front and
downwards.
©IMPEX INC. www.impex-fitness.com
7
Deep Groove
OPERATION NOTES
Weight Plate Selection
1. Use the Weight Selector Pin to select the number of weight plates to exercise.
2. Do not insert weight selector pin while the weight stack or top plate is in elevated position.
3. Be certain the weight Selector Pin is completely inserted.
4. Each Weight Plate weights approximately 10lbs.
5. Please refer to Weight Resistance Chart page.
6. Never use dumbbells or other means to increase the weight resistance. Use only weight plates
provided by manufacturer.
7. For safety purpose while the equipment is not in use. Insert the Lock Pin into the hole
on Guide Rod, and use Combination Lock to lock the Pin to prevent the movement of
Weight Plates. Please refer to the Combination Lock set up.
Cable Tension Adjustment
Adjust the tension of the Cable System by installingthe head of Bench
Press Cable (#61) to the hole on the Single Floating Pulley Bracket (#25).
If the tension is too loose, move up the Cable head by one hole.
If the tension is too tight, move the Cable head down by one hole.
.