Instructions / Assembly

Model #: MPC7706.REV

Holiday Topiary

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

INSTRUCTIONS

1. After unpacking, position topiary on level ground. NOTE: Top section of topiary is inserted inside base

section. (See Photo A)

2. Pull base section upward carefully to remove the top section of topiary. (See Photo B)

3. Connect top to base by inserting threaded end of top section to the female end of base section. Make sure

they are aligned to connect correctly. (See Photos C & D)

4. Tighten by twisting the top clockwise until it locks in place. (See Photo E)

5. Image of the assembled item (See Photo F)

C&D

WARNINGS & CAUTIONS

This item is not a toy. DO NOT ALLOW CHILDREN TO PLAY WITH THIS ITEM.

CARE & MAINTENANCE

This is a hand-painted item and should be handled with care. To clean, use water and soft, white towel. To avoid

damaging the finish, DO NOT USE ANY CLEANERS OR ABRASIVE SPONGES OR STEEL WOOL.

NOTE: Use outdoors under shade to retain luster of finish.

MADE IN PHILIPPINES

PAGE 1
Model #: MPC7706.REV Holiday Topiary IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY INSTRUCTIONS 1. After unpacking, position topiary on level ground. NOTE: Top section of topiary is inserted inside base section. (See Photo A) 2. Pull base section upward carefully to remove the top section of topiary. (See Photo B) 3. Connect top to base by inserting threaded end of top section to the female end of base section. Make sure they are aligned to connect correctly. (See Photos C & D) 4.